The Ruckus R550 is a mid-range, dual-band, dual-concurrent indoor Wi-Fi 6 (802.11ax) access point aimed at enterprise, campus, hospitality, or high-density environments.
It supports 4 spatial streams using a 2×2:2 configuration in both the 2.4 GHz and 5 GHz bands (i.e., two transmit, two receive)
It is often deployed under either a controller-based Ruckus architecture or in an “Unleashed” (controllerless) mode for simpler deployments. (Many product listings mention “Unleashed R550”)
The R550 also supports embedded IoT radios (such as Bluetooth Low Energy / Zigbee) to assist with smart building / IoT use cases.
It is designed to handle moderate to high client densities, offering improved throughput, efficiency, and spectral reuse via 802.11ax enhancements over older Wi-Fi standards.
In sum: the R550 balances performance and cost for many indoor deployments where full 4×4 APs may be overkill but better than entry-level APs is desired.
Below are the main features that distinguish the Ruckus R550:
| Feature | Description / Benefit |
|---|---|
| Dual-band, dual-concurrent operation | Operates simultaneously on 2.4 GHz and 5 GHz bands to serve clients in both bands. |
| 4 spatial streams (2×2:2 per band) | Enables more throughput and capacity vs. basic 1×1 or 2×2 legacy APs. |
| Wi-Fi 6 / 802.11ax support | Leverages features like OFDMA, MU-MIMO, BSS Coloring, Target Wake Time (TWT), etc. (implicit in being “802.11ax”) |
| Peak data rates | Combined (theoretical) data rate up to ~1.77 Gbps (or 1.8 Gbps class) under ideal conditions |
| BeamFlex / smart antennas | Uses Ruckus’s adaptive antenna / beamforming technology to optimize coverage, performance and reliability in challenging environments. |
| Embedded IoT radios (BLE / Zigbee) | Onboard support for Bluetooth Low Energy and Zigbee for IoT / smart-device integration without separate hardware. |
| Flexible Power / Backhaul Options | Supports Power over Ethernet (PoE) to simplify deployment (often 802.3af/at) and can use multi-gig uplinks (depending on model). |
| Deployment Modes | Works in controller-managed mode (e.g. Ruckus SmartZone, Virtual SmartZone, or Ruckus Cloud) or in controllerless (Unleashed) mode for simpler environments. |
| Security & QoS | Supports modern Wi-Fi security (WPA3 / WPA2), captive portal, guest networking, RADIUS, etc. (standard for enterprise APs) |
| Scalability & manageability | Integration with Ruckus’s network management platforms, firmware updates, zero-touch provisioning, monitoring etc. |
| Compact form factor for indoor mounting | Concealed or semi-flush mounting in ceilings, walls, etc. |
Below is a more thorough spec breakdown (from the official datasheet) of the Ruckus R550:
| Parameter | Specification |
|---|---|
| Standards supported | IEEE 802.11ax (Wi-Fi 6), backward compatible with 802.11a/b/g/n/ac |
| Radio / Spatial Streams | Dual–band, dual-concurrent radios. 2×2:2 in 2.4 GHz + 2×2:2 in 5 GHz (total 4 spatial streams) |
| Maximum data rates | Up to ~1,774 Mbps combined (may be marketed as ~1.8 Gbps) |
| Transmit power | Per region / regulatory domain (varies), but typically supports adjustable transmit power on each band (per channel) in compliance with local rules. (Exact dBm values will depend on region) |
| Channels / Bandwidth / Channel Widths | Supports standard 20 / 40 / 80 MHz channel widths in 5 GHz and 20 / 40 MHz in 2.4 GHz (including HE modes) (as per typical 802.11ax capabilities) |
| Antenna | Internal smart / beam-forming antennas (BeamFlex) |
| Ethernet / Backhaul | Typically 1 × 1 Gigabit Ethernet (with link aggregation or multi-gig in some variants) supporting PoE (802.3af/at) |
| Power requirements | Via PoE (802.3af/at) — exact wattage depends on use of IoT radios, full transmit power, etc. |
| Physical / Environmental | Indoor rated, typical temperature/humidity operating ranges per datasheet (consult full datasheet for values) |
| Management / Firmware | Compatible with Ruckus controller platforms (SmartZone, Virtual SmartZone, Ruckus Cloud) and can operate in Unleashed (controllerless) mode |
| Security features | WPA2 / WPA3, 802.1X / RADIUS, guest / captive portal support, encryption, rogue AP detection, etc. |
| Additional radios | Embedded BLE & Zigbee for IoT / sensor / location services integration |
No review given yet!
Fast Delivery
Safe Payment
7 Days Return Policy
100% Authentic Products
You need to Sign in to view this feature
This address will be removed from this list
english
